*The flash output display in an Elinchrom value, it does not indicate an f-stop. Adjustments of power are made in 1/10ths of a stop, therefore the difference between a value of 4.0 and 3.0 is exactly 1 f-stop. It also means that if using multiple heads of different powers, so long as the value is the same the flash output is the same!

**The modelling lamp control has three settings, Off/Proportional/Free. Set on proportional and the modelling lamp power goes up & down with the flash power. On the free setting you can independently control the modelling lamp power.

***It is very important to be able to switch off the slave cell. It stops other people firing your lights and stealing your light!