Swit PL-E60D LED Panel Light DMX

Thanks to the unique 90 ° light guide technology from SWIT, the PL-E60D can produce clear, soft and evenly distributed light
Article number: SW33320

Excl. VAT

Availability: On backorder

Swit PL-E60D LED Panel Light DMX

The PL-E60D from Swit is a LED panel Light with DMX it is specially designed for field portable lighting applications.

320pcs SMD-LEDs are mounted in the inner edge of the light frame, and with SWIT unique 90° light guide technology, PL-E60D can output bright, soft and equally spread light, meanwhile, the light body is slim enough and portable, which is an ideal light source for interview kit and field video productions.

The traditional edge mounted LED lights are always not so bright, because half of the light will go to the backside, even if there’s reflection board, there’s still a lot of light lost.
SWIT innovative technology is to add laser dots with calculated spaces on the reflection glass, so that the multi angles of edge light will be converged on the laser dots, and output 90° to the front with minimum light lost. Then the slim edge mounted light can also be high brightness.

PL-E60D outputs 60W power, feeds 1500Lux luminance at 1 meter distance (center), much brighter than other similar size LED panels. The effective beam angle reaches 70°, bounded by 50% decline. PL-E60D also supports 0 to 100% PWM digital dimming, smoothly and non-flickering.

PL-E60D alternated with 2700K and 6500K LEDs, and the output colour temperature can be continuously adjustable between 2700K and 6500K.

CRI (Colour Rendering Index) is a measure of the ability of a light source to reveal the colours of various objects faithfully in comparison with a natural light source. And TLCI (Television Lighting Consistency Index) is special for the colour reveal ability by camera sensor. Max value 100.
The normal LED light has 80-85 CRI or TLCI, while PL-E60 offers the super high CRI at 98 and TLCI at 99, and will not lost the object original colours.

The rear LCD screen can display the current dimmer percentage, colour temperature value, and remaining battery indications.

PL-E60D supports quick adjusting brightness and colour temperature:
Press the Dimmer knob, it will switch from 1% stepping to 10% stepping, to quick adjust brightness;
Press Colour temperature knob, it will switch from 50K stepping to the following commonly used colour temperature selection: 2700K / 3200K / 4500K / 5600K / 6500K.

PL-E60D adopts standard 5-pin DMX in/out port, supports DMX512 protocol, and adjusts dimmer and colour temperature by DMX controller.
The dimmer and colour temperature occupy 1 DMX address respectively.
Press and hold dimmer knob for 2s to enter communication address setting interface, the address setting range is 001 to 512.

Press and hold colour temperature adjusting knob for around 2 seconds, the upper left corner of LCD shows "CH" indicating that the communication control mode currently is interaction control mode. In this mode, set the target lights to the same communication address to work normally, and the master slave machine is not distinguished.
Press and hold dimmer knob for 2s to enter communication address setting interface, the address setting range is 001 to 512.

Operate any of the CH 001 light, all the other CH 001 lights can be controlled together, max 512 CH addresses can be set.


  • LED: 320pcs SMD LEDs
  • Illuminance: 1500Lux @ 1m
  • Beam angle: 70° (50% bounded)
  • Color Temperature: 2700K - 6500K
  • CRI: 98
  • TLCI: 99
  • Power: Approx. 60W
  • Working voltage: DC11V?36V
  • Dimension: 382×403×48mm
  • Lighting area: 257×257mm
  • Weight: 3.2kg


  • 1 x PL-E60D light
  • 1 x AC-DC power adaptor
  • 1 x Carrying bag

0 stars based on 0 reviews

The light- and studiospecialist
in The Netherlands

Ordered before 16:00,
send the same day

More than 3000 products
available from stock

Atmospheric showroom
and own repair department

Expert staff
with practical experience

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »